Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 04-08-2006 Installation Manual page 204

Installing from a Local CD or DVD Drive
Before starting a new installation of a SUSE Linux Enterprise SP, ensure that the fol-
lowing prerequisite items are available:
• The original SUSE Linux Enterprise installation media (CDs or DVD)
• All of the Service Pack installation media (CDs or DVD)
There are two ways to install an SUSE Linux Enterprise SP system from scratch: either
boot from the original installation medium and register the Service Pack as an add-on
product as outlined in
from the SP medium and insert the original media, when YaST asks for them—see
Booting from the Service Pack Medium
Procedure 8.1 Booting from the Original Installation Medium
1 Insert the original SUSE Linux Enterprise 10 boot medium and boot your machine.
2 In the YaST, Installation Mode dialog, select New Installation and activate Include
3 YaST asks you to register the SP medium as an add-on product. Once done, run
Procedure 8.2 Booting from the Service Pack Medium
1 Insert the first SUSE Linux Enterprise SP medium (CD or DVD number 1) and
2 Select Installation to boot the SP kernel. The kernel loads. Wait until you are
3 Insert the original SUSE Linux Enterprise 10 installation medium number 1 then
4 Accept the license agreement then select a language, default desktop, and other
204 Installation and Administration
Booting from the Original Installation Medium
For detailed information, see
(page 36).
Add-On Products from Separate Media.
the regular installation as described in
boot your machine. A boot screen similar to the original installation of SUSE
Linux Enterprise 10 is displayed.
prompted to insert CD1 of the product.
click OK to run the regular installation.
installation settings.
(page 204).
Section 3.2, "System Start-Up for Installation"
Chapter 3, Installation with YaST
(page 204) or boot
(page 35).