Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 04-08-2006 Installation Manual page 583

2 In the Address tab, click Hostname and Name Server.
3 To disable DHCP-driven host name configuration, deselect Change Hostname
via DHCP.
4 Enter Hostname and, if it is needed, Domain Name.
5 To disable DHCP driven updates of the name server list, deselect Update Name
Servers and Search List via DHCP.
6 Enter the name servers and domain search list.
7 Click OK.
8 Click Next.
9 To activate the configuration, click Next again.
Configuring Routing
To make your machine communicate with other machines and other networks, routing
information must be given to make network traffic take the correct path. If DHCP is
used, this information is automatically provided. If a static setup is used, this data must
be added manually.
1 Select a card from the list of detected cards in the YaST network card configura-
tion module and click Edit.
2 In the Address tab, click Routing.
3 Enter the IP of the Default Gateway.
4 Click OK.
5 Click Next.
6 To activate the configuration, click Next again.
Basic Networking 583