Displaying Of The Energy Meters; Page "25": Displaying Of The Total Energy Meters; Page "26": Displaying Of The Partial Energies - CARLO GAVAZZI WM3-96 - PROGRAMMING Instruction Manual

10
Displaying of the variables
Harmonics:
This angle is displayed only if the measurements
are taken in a three-phase system with neutral.
Pages relating to the energy meters
Page "25" (12 in single phase mode)
Displaying of the total energy meters
key disabled.
Page "26" (13 in single phase mode)
Displaying of partial energies
key is active; modification of tariff/displayed period.
By pressing the
relating to the season is highlighted. By using the
keys, it's possible to change the season displayed in
that page. Pressing the
relating to the period is highlighted. Using the
keys, it's possible to change the tariff period within the
displayed season. Pressing the
you go back to the measuring page. The changes of
season and tariff period only refer to the displaying of the
values stored in the corresponding season and period.
The changes carried out in this page do not have
any influence on the method of tariff management
of the instrument; they are only valid for display
purposes.
To begin with
5
0
Generated
270
Imported
180
key for the first time, the range
key another time, the range
7 12
90
key for the third time,
Pass 999
and
and
12