CARLO GAVAZZI WM3-96 - PROGRAMMING Instruction Manual page 32

Outputs / Other settings
choose among all the available ones (see on page
43); scroll the variables by means of the
keys and confirm the selection with
ability (or non-availability) of the variable is clearly
indicated on the display.
•TYPE: type of alarm: up alarm (UP); down alarm (DOWN); up
alarm with latch (UP L): in this case the reset of the
output can only be manual; down alarm with latch
(D.L.): in this case the reset of the output can only be
manual; down alarm with disabling at power ON
(D.DO). Choose the desired alarm type by means of
the
•SET ON: ON-alarm set-point. Select the value of the variable
by means of the
.
•SET OFF: OFF-alarm set-point. Select the value of the
variable by means of the
confirm it with
•OUT: normally energized alarm (NE) or normally de-ener-
gized alarm (ND). Choose the desired function by
means of the
.
•DELAY: delay on alarm activation. Select the desired delay
value in seconds by means of the
and confirm it with
Only in case of controls of the power variables,
it's necessary to select the resolution (position of
the decimal point) of the alarm set-point's value.
Pulse output
31
and keys and confirm it with
and
.
and
29
keys and confirm it with
and
keys and confirm it with
.
37
33
and
. The avail-
.
keys and
and keys
Language
37