Analogue Outputs - CARLO GAVAZZI WM3-96 - PROGRAMMING Instruction Manual

Outputs / Other settings
•VARIA: variable to be connected to the output; choose among
the available ones (see on page 43) by means of the
and
availability (or non-availability) of the variable is clearly
indicated on the display.
•MIN O: value expressed as % of the "zero" of the output range
(0-20mA, 0-10V, etc.) that is generaged by the minimum
measured value (Min In). Select the desired value by
means of the
•MAX O: value expressed as % of the full scale of the output range
(0-20mA, 0-10V, etc.) that is generated by the measured
value (Max In). Select the desired value by means of the
and
Alarm parameters
33

Analogue outputs

Select ANALOG OUTPUTS from the
main menu by means of the
the various parameters:
OUT A0: Analogue output, SLOT
A0, channel 1;
OUT A1: Analogue output, SLOT
A1, channel 2;
OUT B0: Analogue output, SLOT
B0, channel 3;
OUT B1: Analogue output, SLOT
B1, channel 4.
Select the desired parameter by
means of the
confirm with
evant submenus:
keys and confirm the selection with
and
keys, and confirm it with
29
keys; confirm it with
keys and confirm it with
37
35
to enter
and keys and
to enter the rel-
. The
.
Useful info
and
.
39