Pass "999": Energy Consumption Storage - CARLO GAVAZZI WM3-96 - PROGRAMMING Instruction Manual

12
Control type:
alarm (e.g. A2),
diagnostics (e.g. D1),
maximum value (MAX),
minimum value (MIN).
Date of the
event.
To reset all the events press the
procedure press the
press the
Pass "999": energy consumption storage (Only if the
RS232+RTC module is present)
The RS232+RTC module allows also the storage of the energy
consumption of the previous two months. To enter this func-
tion, press the
code
shows you the page where all the information are stored.
Page 00
7
Displaying of the variables
Time of the
event.
key: to exit from the reset procedure
key.
key: when the instrument asks for the pass
, set the value "999": the instrument
7
Only for alarms and diag-
nostics: detection of the
abnormal condition (ON)
or return to the normal con-
dition (OFF).
Alarms: value of
the ON alarm;
Max and MIN log-
ging: maximum
and
measured values.
key, to continue the reset
Variable being
controlled.
minimum
System
14