CARLO GAVAZZI WM3-96 - PROGRAMMING Instruction Manual page 25

26
To program the "end date" follow the same procedure de-
scribed above from No. 11 to No. 16. After confirming the "end"
day by means of the
to indicate the conclusion of the HOLIDAY period program-
ming cycle. You can also use the
and (moves from left to right) keys to scroll along the
available parameters.
pag.
25
From page 25
1.2..
..2.1
Diagrams
21
Energy Meters Management
key, the HOLIDAY box is highlighted
It's possible to choose the tariff to be
associated to the HOLIDAY period
according to the following procedure:
starting from the box on the previous
page, number 10, press the
again: the instrument will display the
box shown on the left. Press
box of the "trf" value is highlighted;
press the
ment will display on the lower section
the box where the tariff is to be set.
Select the desired tariff (from 1 to 4)
by means of the
and confirm it with
choices and/or exit the menus, use
the
22
(moves from right to left)
key again: the instru-
key.
Meters reset
28
key
: the
and keys
. To reset your
28