CARLO GAVAZZI WM3-96 - PROGRAMMING Instruction Manual page 28

Outputs / Other settings
To conclude the RESET procedure, press
the TARIFF SELECTION menu, press
TOTAL - : reset of the exported energy meters (-kWh, -kvarh);
PARTIAL + : reset of the partial imported energy meters
(+kWh, +kvarh);
PARTIAL - : reset of the partial exported energy meters
(-kWh, -kvarh).
Multi tariff
27
The reset procedure allows the user to choose
among the following different choices:
ALL: reset of all the energy meters (imported/
exported energies);
TOTAL + : reset of the imported energy me-
ters (+kWh, +kvarh);
HARMONIC ANALYSIS
This function enables the display of
the windows relating to the harmonic
analysis.
Press
use the
the phase where you want to enable
the harmonic analysis. The
allows the user to enable (ON) or
disable (OFF) the displaying (the
function is cyclical: ON-OFF-ON).
To go back to the main menu, press
to enter the menu; then,
and
.
Alarm parameters
37
29
; to go back to
.
keys to select
33
key