Reset Of The Energy Meters - CARLO GAVAZZI WM3-96 - PROGRAMMING Instruction Manual

Energy Meters Management
1.2..
..2.1
1.2..
..2.1
1.2..
..2.1
Proceed with the same
principle for the follow-
ing rows. To exit any
item use always
Diagrams
21
3- press the
tariff" hour is highlighted;
4- press the
HOURS box will appear on the lower
part of the display; now you can
choose the hours - e.g. 8 - by means
of the
5- press the
tariff" minutes will be highlighted;
6-press the
UTES box will appear on the lower
part of the display; now you can set
the minutes - e.g. 10 - by means of the
and and
7-after the confirmation of the last set-
ting, press
selection of the first "trf" parameter
you have highlighted.
The "starting hour" of the following line
becomes equal to the "end hour" you
have just selected. Only when the "trf"
parameter is highlighted, you can scroll
the parameters and modify them:
use the
parameter; use the
from left to right and the
move from right to left.
8- Press
of the parameters of the relevant row
(no boxes are to be highlighted);
9- press
of the other programming lines; the
pointer on the right shows the line
where the user can modify the pa-
.
rameters (points from 1 to 7).

Reset of the energy meters

22
28
key again; the "end-
key again; the
and keys.
key again; the "end
key again: the MIN-
keys.
and you are back to the
key to access to the
to exit the programming
and to select one
23
key to move
key to
28