Boot
Boot performs the following tasks after POST is complete:
•
Performs universal port configuration
•
Initializes links
•
Analyzes the fabric
If any ports are connected to other switches, the switch participates in a fabric configuration.
•
Obtains a domain ID and assigns port addresses
•
Constructs unicast routing tables
•
Enables normal port operation
Supported HBAs and CNAs
NOTE:
CNAs apply to the FCoE Converged Network Switch only.
For a list of HBAs that have been tested and are known to work with the SAN switches, see the latest
version of the HP StorageWorks SAN Design Reference Guide, at
sandesignguide.
94
Technical specifications
http://www.hp.com/go/