Activating Additional 8/80 San Switch Ports; Encryption San Switch Features; Nonport Side View 8/80 San Switch - HP 1606 Hardware Reference Manual
Hp storageworks 8-gb san switch hardware reference guide (5697-0291, july 2010)
Hide thumbs
Also See for 1606:
- Release note (74 pages) ,
- Quickspecs (21 pages) ,
- Update manual (9 pages)
Table of Contents
Advertisement
1. 8/80 SAN Switch
2. Nonport side
3. Power supply #2
4. Fan assembly #3
Figure 5 Nonport side view 8/80 SAN Switch
.
Activating additional 8/80 SAN Switch ports
By default, the 8/80 SAN Switch model integrates 48 licensed ports (ports 0 through 47). To enable
additional ports, you must purchase and install the HP StorageWorks 8/80 SAN Switch 8-Gb 16-port
Upgrade LTU (part number T5520A):
•
To enable ports 48 through 63, you must purchase and install one upgrade license.
•
To enable ports 64 through 80, you must purchase and install a second upgrade license.
See
Installing and activating Port Upgrade
Encryption SAN Switch features
The Encryption SAN Switch has the following features:
•
32 front-end 1, 2, 4, or 8 Gb/s autosensing F_Port, FL_Port, E_Port, EX_Port, or M_Ports to connect
host servers, SAN disks, SAN tapes, edge switches, or core switches
•
Encryption and decryption engines to provide in-line crypto services with up to 96 Gb/s throughput
for disk I/O and up to 48 Gb/s throughput for tape I/O (mix of ciphertext and cleartext traffic)
•
Integrated with HP SKM system
•
Full 1:1 subscription on all 32 ports at 8 Gb/s
•
HA cluster, DEK cluster, and EG to enable transparent failover, host MPIO failover, and centralized
management of multiple encryption switches
•
Support for automatic expiry or CLI manual based re-keying
18
HP StorageWorks 8-Gb SAN Switches
5. Fan assembly #2
6. Fan assembly #1
7. Power supply #1
licenses, page 25.
Advertisement
Table of Contents
