Synchronizing Local Time Using Network Time Protocol - HP 1606 Hardware Reference Manual

Local time
Alaskan Standard
Alaskan Daylight
Hawaiian Standard

Synchronizing local time using Network Time Protocol

You can synchronize the local time of the principal or primary FCS switch to a maximum of eight
external NTP servers. To keep the time in your SAN current, HP recommends that the principal or
primary FCS switch has its time synchronized with at least one external NTP server. The other switches
in the fabric set their time automatically from the principal or primary FCS switch.
All switches in the fabric maintain the current clock server value in nonvolatile memory. By default,
this value is the local clock server <LOCL> of the principal or primary FCS switch. Changes to the
clock server value on the principal or primary FCS switch are propagated to all switches in the fabric.
For more information on using an NTP server, and IPv6 considerations, see the Fabric OS
Administrator's Guide.
tstimezone parameter (difference from UTC)
-9,0
-8,0
-10,0
8-Gb SAN Switch Hardware Reference Guide 51