Table of Contents
Advertisement
Recreating the switch file system in maintenance mode
The Remake Filesystem option resets the switch to the factory default values including user accounts and
zoning. In the event of a loss of power, the switch configuration may become corrupt. The file system on
which the configuration is stored must be re-created.
CAUTION:
If you choose the Remake Filesystem option, you will lose all changes made to the fabric
configuration that involve that switch, such as password and zoning changes. You must then restore the
switch from an archived configuration or reconfigure the portions of the fabric that involve the switch.
Resetting the switch in maintenance mode
The Reset Switch option ends the Telnet session, exits maintenance mode and reboots the switch using the
current switch configuration. All unpacked firmware image files that reside on the switch are deleted.
Updating the Boot Loader in maintenance mode
The Update Boot Loader option installs the boot loader from the last installed firmware package. Use this
option only at the direction of your authorized maintenance provider.
McDATA® 4Gb SAN Switch for HP p-Class BladeSystem installation guide
43
Advertisement
Table of Contents
