Port Side Leds On The 1606 Extension San Switch - HP 1606 Hardware Reference Manual

NOTE:
The LEDs may be solid amber or may flash during boot, POST, or other diagnostic tests. This is normal;
it does not indicate a problem unless the LEDs do not indicate a healthy state after all boot processes
and diagnostic tests are complete.
1. System status LED
2. System power LED
3. Console port
4. Ethernet link LED
5. Ethernet status LED
6. Ethernet port
7. IP Address pull-out tab
8. USB port
Figure 33 Port side LEDs on the 1606 Extension SAN Switch
.
70 Managing the 8-Gb SAN Switches
9. Port 0 status LED
10. Port 4 status LED
11. Port 8 status LED
12. GbE copper port
13. GbE port 0 Fault (FLT) LED
14. GbE port 0 status/activity LED
15. GbE optical port
16. GbE dual-color optical port LED