Figure 35. Replace Hard Drive Prompt
StorCon detects the new drive and expects clearance to build this drive as a replacement into the
array drive. See Figure 36.
Figure 36. Add Disk to Array Confirmation
When clearance is given, the state of the array drive changes to "Rebuild," for example, the missing
data is reconstructed out of the remaining data and redundancy information. See Figure 37.
Figure 37. Array Drive Summary
The Error state of an array drive is critical. There are several procedures in the Intel RAID
Controller SRCU32's firmware to handle such cases and bring back the array drive into operation
without losing data. See Figure 38.
Figure 38. Array Drive Error State Dialog
Storage Console
99