Table of Contents
Advertisement
Intel RAID Controller SRCU32 Service and Intel RAID
Controller SRCU32 Mail
There are additional tools list below which are part of StorCon+ delivery.
Intel RAID Controller SRCU32 Service
Intel RAID Controller SRCU32 CTRLSRV
Intel RAID Controller SRCU32 Mail
It is recommended that you install the Intel RAID Controller SRCU32 Service / Intel RAID
Controller SRCU32 CTRLSRV and the Intel RAID Controller SRCU32 Mail tool on each server
that is equipped with Intel RAID Controller SRCU32. Thus, remote access to Intel RAID
Controller SRCU32s in a network can be easily managed from one or several authorized users.
1. To install the Intel RAID Controller SRCU32 Service under Windows NT, copy IIRSRV.EXE
and IIRSRV.CPL into the winnt\system32 directory and from the command line load
..\IIRSRV –i.
2. In the control panel load the "services" program and activate the Intel RAID Controller
SRCU32 Service with the Start button.
To start the Intel RAID Controller SRCU32 Service during every new boot of the system
automatically, click "Startup" button. See Figure 107.
Storage Console Plus
Allows remote access to an Intel RAID
Controller SRCU32 in a Windows NT server
Allows remote access to an Intel RAID
Controller SRCU32 in a Novell server
Converts Intel RAID Controller SRCU32
messages into standard mails (for
Windows 9x/NT, MAPI format)
Figure 107. Services
165
Advertisement
Table of Contents
