Table of Contents
Advertisement
Table 11.
Hard Drive Replacement Options (continued)
Manual Hot Plug
Description
StorCon or StorCon+ guides
the user to the point where a
new hard drive can be built
into the array drive.
Intel RAID Controller SRCU32 Quick Start
This section is a quick start that can be used when installing the Intel RAID Controller SRCU32
using either Windows 2000 or Red Hat
information when using other operating systems, please refer to the chapters 3 through 10.
Make an OS Installation Diskette
1. Boot from the Intel RAID Controller SRCU32 Software CD.
2. Select "Create Diskettes."
3. Create an operating system installation diskette.
Getting Started
Auto Hot Plug
The subsystem must be
configured with StorCon or
StorCon Plus, before the
auto hot plug can work.
Thereafter a hard drive can
just be pulled out and
plugged in, and the Intel
RAID Controller SRCU32
"knows" what to do. In
addition, SAF-TE and SES
report the enclosure status
(power supplies, fans,
temperature etc.) to the Intel
RAID Controller SRCU32
and the Intel RAID Controller
SRCU32 driver.
†
†
Linux
7.1. For more detailed instructions and to get
Automatic Replacement
with Hot Fix Drive
The hot fix drive is assigned
to an array drive. There are
two types of hot fix drives:
Private hot fix drive
(Available for one array drive
only)
Pool hot fix drive
(Several array drives share
this hot fix drive)
37
Advertisement
Table of Contents
