Table of Contents
Advertisement
Advanced Setup
Configure Controller
Controller Settings
Use the Controller Settings dialog to change Intel RAID Controller SRCU32 parameters and
settings. All information concerning physical, logical, array and host drives are stored twice
(primary and secondary configuration data) on each hard drive. For example, the Intel RAID
Controller SRCU32 itself carries no configuration data of a specific disk array. For this reason the
migration of host drives between Intel RAID Controller SRCU32s is very easy and secure, even if
the SCSI IDs and channels are changed. Simply connect the hard drives to the new Intel RAID
Controller SRCU32, and the host drives will be automatically available. See Figure 39.
Table 15.
Controller Settings
Parameter
Alternatives
Cache
On
Off
Delayed Write
On
Off
BIOS
Enabled
Disabled
Removed
100
Figure 39. Controller Settings Dialog
Description
Intel RAID Controller SRCU32 cache (write and read cache) On
Intel RAID Controller SRCU32 cache (write and read cache) Off
Write cache On
Write cache Off
BIOS enabled
BIOS disabled, but <Ctrl> + <G> allowed
BIOS and <Ctrl> + <G> disabled
Intel RAID Controller SRCU32 User's Guide
continued
Advertisement
Table of Contents
