Installing Unixware; General Installation Notes; Minimum Hardware Requirements; Minimum Software Requirements - Intel SRCU32 - RAID Controller User Manual

6 Installing UnixWare

This section discusses installation issues related to the UnixWare operating systems
(UnixWare 7.1.1). For a successful installation, study the SCO UNIX system manuals thoroughly.
The required Intel RAID Controller SRCU32 disks can be created from the Intel RAID Controller
SRCU32 system CD-ROM.

General Installation Notes

This section identifies the minimum hardware and software required to successfully install the Intel
RAID Controller SRCU32 the accompanying RAID Software Suite.

Minimum Hardware Requirements

NOTE
The Intel RAID Controller SRCU32 will work in a 32-bit, 33 or 64 MHz PCI slot; however, a 64-bit
66 MHz slot is recommended for maximum performance.
Computer with CD-ROM drive (not attached to the Intel RAID Controller SRCU32).
Computer must be on the supported hardware list (for example, Intel SCB2 server board).
One available PCI slot. See note above.
PCI 2.2 compliant System BIOS.
SCSI hard drive(s) (the minimum required to meet the desired RAID level).

Minimum Software Requirements

RAID Software Suite CD-ROM
20 MB of hard drive space
RAID Driver Installation Diskette for UnixWare
SCO UnixWare 7.1 OS software
71