Table of Contents
Advertisement
NOTE
The array build will continue as a background task. Exit StorCon, by pressing <ESC>, and the
array build will continue in the background after BIOS POST upon reboot. You can then proceed
with OS installation while the array continues the build process in the background.
11. When leaving StorCon, by pressing <ESC>, a progress window displays the estimated
completion time for the build process.
12. Upon successful completion of the build process, the disk array changes to Ready status.
Set the BIOS Boot Order
This step requires entering the system BIOS and setting the proper boot priority. This step may
differ from system to system. Refer to the system documentation for details. The example below
®
refers to the Intel
1. During POST, press <F2> to enter the BIOS Setup Utility.
2. Navigate to the "Boot" menu, then access the "Boot Device Priority" submenu and set the
following order:
Removable Devices
ATAPI CD-ROM Drive
Hard Drive
®
Intel
Boot Agent
Getting Started
SCB2 server board.
41
Advertisement
Table of Contents
