The Logical Drive Information Window; Figure 89. Logical Drive Information Window - Intel SRCU32 - RAID Controller User Manual

The Logical Drive Information Window

Double click on the logical drive icon. This window shows information on a logical drive. A
logical drive can be either a single disk, or a chaining group of disks (concatenation), or a stripe set
of several disks. See Figure 89.
Drive No
Drive Name
Type
Status
Capacity
Attributes
Last Status
148

Figure 89. Logical Drive Information Window

The number of the logical drive.
The name of the logical drive.
The type of the logical drive. A logical drive can be either a single disk,
or a chaining group of disks (concatenation), or a stripe set of several
disks.
This is the state of the logical drive. It can be ready, missing (not
available after reset) or failed (for example, no longer available for the
controller).
The available capacity of array drives or host drives.
The attribute of a logical drive is usually read/write ([RW]). If a
component of a disk array is missing during startup and the operator
decides not to activate fail mode, the array is set to the read only attribute
([RO]). When the missing drive becomes available, the array drive
shows the ready status (for example, attribute [RW]).
The last status information of a logical drive. This is different from the
last status information of physical drives.
Intel RAID Controller SRCU32 User's Guide