Table of Contents
Advertisement
Express Setup
Configure Host Drives
Express Setup Configure Host Drives allows for easy installation of new host drives.
NOTE
Creation of a host drive as Single Disk, RAID0, RAID1 or RAID10 is non-destructive so that the
partition table of the new drive (which could have conceivably been used on another SCSI HBA)
could have valid data. To prevent this from occurring, run a surface check on each disk before
creating hosts.
NOTE
Apart from minor differences, this menu option is identical to menu option Configure Host Drives
in Advanced Setup, Chapter 7. In Express Setup, the user may not select a stripe size (defaults to
128 KB) or use the Split/Merge functions.
Host Drive States
After clicking on Configure Host Drives, StorCon displays a list of existing host drives. In a new
system this list shows no host drive entries. In the example in Figure 26 one host drive is available,
and it is a RAID 5 array drive (with approximate 17 GB capacity). The status is ready, meaning
that this host drive is fully available and redundant.
92
Figure 25. Screen Service Messages and Async. Events
Intel RAID Controller SRCU32 User's Guide
Advertisement
Table of Contents
