Table of Contents
Advertisement
5 Installing Novell Netware
This section discusses installation issues related to the Novell NetWare operating system and
covers versions NetWare 4.2 and NetWare 5.1. For a successful installation, study the NetWare
system manuals thoroughly. The information provided in this section refers to the loading of the
Intel RAID Controller SRCU32 NetWare driver(s) only. The required Intel RAID Controller
SRCU32 disks can be created from the Intel RAID Controller SRCU32 system CD-ROM.
Pre-Installation Requirements Checklist
This section identifies the minimum hardware and software required to successfully install the Intel
RAID Controller SRCU32 and the accompanying RAID Software Suite.
Minimum Hardware Requirements
NOTE
The Intel RAID Controller SRCU32 will work in a 32-bit, 33 or 64 MHz PCI slot; however, a 64-bit
66 MHz slot is recommended for maximum performance.
Computer with CD-ROM drive (not attached to the Intel RAID Controller SRCU32). The
computer must be on the supported hardware list (for example, Intel SCB2 server board).
One available PCI slot. See note above.
PCI 2.2 compliant System BIOS.
SCSI hard drive(s) (the minimum required to meet the desired RAID level).
Minimum Software Requirements
RAID Software Suite CD-ROM
20 MB of hard drive space
RAID Driver Installation Diskette for NetWare
Novell NetWare 4.2 or 5.1 Software
63
Advertisement
Table of Contents
