Install A 2.5" Ssd Or Hard Drive - Intel NUC 11 Pro Kit NUC11TNHi70Q User Manual

5.0

Install a 2.5" SSD or Hard Drive

Intel® NUC 11 Pro Kit NUC11TNHi30P, Intel® NUC 11 Pro Kit NUC11TNHi50W and
Intel® NUC 11 Pro Kit NUC11TNHi70Q support an additional 2.5" Solid State Drive
(SSD) or Hard Disk Drive (HDD).
Find compatible 2.5" drives in the Intel Product Compatibility Tool:
• Intel® NUC 11 Pro Kit NUC11TNHi30P
• Intel® NUC 11 Pro Kit NUC11TNHi50W
• Intel® NUC 11 Pro Kit NUC11TNHi70Q
1. Unscrew the four screws holding the current drive in the bay.
2. Remove the pre-installed drive from the drive bay.
3. Slide the new 2.5" drive into the drive bay, ensuring the SATA connectors are fully
seated into the connectors of the SATA daughter card (A).
4. Secure the drive into the drive bay with the four screws that were used in step 1.
Set the drive bay bracket down inside the chassis (C).
NUC11TNHi30P, NUC11TNHi50W, NUC11TNHi70Q
User Guide – January 2021
12