Configuring Inputs And Outputs; Configuring Alarm Inputs - Bosch DB18C3100R2 Installation Manual

DiBos/DiBos Micro
6.5

Configuring Inputs and Outputs

6.5.1

Configuring Alarm Inputs

Inputs and outputs menu > Alarm inputs tab
This dialog box allows the user to activate or deactivate the alarm inputs on the grabber card
and select the standby condition. There are 32 alarm inputs available in DiBos and 12 alarm
inputs in DiBos micro.
1
2
3
4
5
Bosch Sicherheitssysteme GmbH
Alarm inputs
Type
Name
N/C contact
Save
Installation Guide
Click the tab.
Click the down arrow in the column and select
whether an input is to be configured or not.
The input is assessed as an alarm input.
The input is not assessed as an alarm input.
Place the cursor in the column and enter the name of
the alarm input.
Specify whether an N/C or N/O contact is connected
to the alarm input.
N/C contact connected.
N/O contact connected.
The entries are saved.
Default Configuration | en
F.01U.033.308 | V7 | 2009.09
73