Bosch DB18C3100R2 Installation Manual page 112

112 en | Default Configuration
6
7
8
F.01U.033.308 | V7 | 2009.09
Live image quality
Standard
User-defined:
Quality levels
Automatic
disconnection
Time until display of
warning dialog
Time until
disconnection if
warning dialog
remains unanswered
Alarm procedure
Display alarm cameras
automatically in live
mode
additionally in
playback mode
Acoustic signal on
incoming video alarm:
Search
Playback
Stop
Automatic alarm
recording
Installation Guide
Specifies the quality of the live image.
Resets the live image quality to the default settings.
Note:
Live image default settings
– CIF resolution
– Quality level 4
A live image quality can be selected.
Opens a dialog box in which recording qualities can be
displayed and edited or new recording qualities added.
This function is used to disconnect the local live image and all
ISDN and network connections (previously independently
connected by the video system) automatically after a specific
period of time.
Enter the time after which a warning dialog is to be
displayed.
Note:
The warning dialog allows you to either maintain the
connection or break it immediately.
Enter the time after which disconnection is to take place if
the warning dialog remains unanswered (a value of 0 means
that no disconnection will take place).
Specifies how incoming alarms are displayed in live or
playback mode.
When incoming alarms are received in live mode, the cameras
or remote stations in alarm status are listed in the device list.
The images are displayed automatically.
When in playback mode, if there is an alarm input, the system
switches to live mode. Cameras or remote stations in alarm
status are listed in the device list. The images are displayed
automatically.
Here you can assign an audio signal (wav file) to incoming
video alarms. Enter the path and the file name or click
Browse.
Click Browse and, in the window that opens, select the wav
file you want to assign to the incoming video alarms. Click
Open to save the file.
If you want to listen to the audio signal, click Playback.
Ends playback of the audio signal.
Automatically displays all incoming alarms on the DiBos
receiver.
Note:
The automatic alarm recording is displayed on the user
interface.
DiBos/DiBos Micro
Bosch Sicherheitssysteme GmbH