Specifying Monitoring Zone For Motion Cameras - Bosch DB18C3100R2 Installation Manual

DiBos/DiBos Micro
6.2.3

Specifying Monitoring Zone for Motion Cameras

Video and audio connections menu > Camera section > Edit button
Make the settings for each camera as required.
1
2
3
4
5
6
Bosch Sicherheitssysteme GmbH
Motion
Activate
Within the blue frame
(image window)
Left-click or hold the
left mouse button
down and drag an area
Right-click or hold the
right mouse button
down and drag an area
Sensitivity
high
low
Grid - Show
OK
Installation Guide
Click the tab. The entire image content inside the blue frame
is initially sensitive, i.e. motion is monitored.
Select the check box to activate the motion sensor.
Displays the current live image and the area being monitored.
The image is updated every second.
A plus sign appears beside the mouse cursor to show that the
selected area is sensitive and will be assessed during motion
detection. Sensitive areas are shown shaded in yellow.
A minus sign appears beside the mouse cursor to show that
the selected area is not sensitive and will not be assessed
during motion detection. Non-sensitive areas are shown
unshaded.
Change the sensitivity when the results of motion detection
are not satisfactory.
The sensitivity increases i.e. to trigger an alarm, smaller
changes in the edges, the brightness and the motion are
needed.
The sensitivity decreases i.e. to trigger an alarm, larger
changes in the edges, the brightness and the motion are
needed.
A grid is shown in the image when the check box is activated.
The sizes of the drawn-in sensitive/insensitive areas are
oriented around the grid.
The entries are saved.
Default Configuration | en
F.01U.033.308 | V7 | 2009.09
49