Bosch DB18C3100R2 Installation Manual page 19

DiBos/DiBos Micro
Supported JPEG IP cameras
from other manufacturers
Audio inputs
Audio outputs
Alarm inputs (NO/NC)
Malfunction relay output
(MAL)
Relay outputs (NO/NC)
Video monitor outputs
Bilinx control
PTZ control
Internal memory capacity
Video output
Ethernet
RS 232
USB 2.0
DVD burner
Power
Power consumption (typical)
Power consumption
Operating system
Web browser
Export of video/audio data
Image printer
External memory capacity
Bosch Sicherheitssysteme GmbH
For detailed information, please contact your local Bosch
Security Systems sales office.
2 (DB06) or 4 (DB12), cinch connection, line in signal,
16 kHz sampling rate
1, line out signal, 1/8 inch phone jack (3.5 mm)
12
Switching voltage (high): >2 VDC
Switching voltage (low): <0.5 VDC
Input voltage: max. 40 VDC
Impedance: 22 kOhm pull up (+5 V)
1
Voltage range: 30 VAC - 40 VDC
Switching current: max. 500 mA AC or DC
Breaking capacity: max. 10 VA
12
Voltage range: 30 VAC - 40 VDC
Switching current: max. 500 mA AC or DC
Breaking capacity: max. 10 VA
2, FBAS outputs for single image or sequence displays
from connected analog cameras
For AutoDome control and configuration of Dinion cameras
via coax cable
Bilinx: via coax cable for up to 12 AutoDome devices.
Biphase: up to 12 AutoDome devices.
RS 232: via the console port of any Allegiant matrix switch.
250 GB, 500 GB (the operating system and the DiBos
micro software require 8 GB hard disk memory space.)
1x VGA
10/100/1000 Base-T, settable bandwidth limit
1
6
Internal.
Media supported: CD-R, CD-RW, DVD-R
100 / 240 VAC, 50 / 60 Hz (automatic switchover)
Approx. 120 W
140 W
Microsoft Windows XP® Embedded
Microsoft Internet Explorer 6 or higher, under Windows
2000, Windows® XP or Windows® Vista
DiBos or ASF format onto CD-R, CD-RW, DVD-R, USB
device or network drive
Via USB (with Windows XP drivers)
Max. 16 TB
Installation Guide
Introduction | en 19
F.01U.033.308 | V7 | 2009.09