Bosch DB18C3100R2 Installation Manual page 56

56 en | Default Configuration
1
2
3
4
5
6
7
F.01U.033.308 | V7 | 2009.09
Address:
Display
Configure
Name:
Max. no. of images per
sec.:
User name:
Password:
Motion camera
Port:
Installation Guide
Enter the address (URL) of the camera and the command to
access the JPEG images.
The following syntax must be applied:
Bosch BVIP devices:
http://IP-Adresse/snap.jpg?JpegSize=S (for QCIF)
http://IP-Adresse/snap.jpg?JpegSize=M (for CIF)
http://IP-Adresse/snap.jpg?JpegSize=L (for 2CIF)
http://IP-Adresse/snap.jpg?JpegSize=XL (for 4CIF)
For multi-channel devices, the channel must be selected as
follows:
http://IP-Adresse/snap.jpg?JpegCam=2&JpegSize=XL (e.g.for
channel 2 and 4CIF)
Bosch MegaPixel IP camera:
http://IP-Adresse/image?res=full&x0=0&y0=0
&x1=100%&y1=100%&quality=12&doublescan=0
With HTTP, motion detection occurs via port [&mdn=Port
number].
tftp://IP-Adresse/
image?res=half&x0=0&y0=0&x1=1600&y1=1200&quality=15
With TFTP, the motion detection is retained in the image. It is
not necessary to configure a port.
Axis: http://IP-Adresse/jpg/image.jpg
Mobotix: http://IP-Adresse/record/current.jpg
Note:
More information can be found in the installation documents
of the relevant camera.
When you click the button, you can check whether the
entered URL and command are correct. If so, the camera
image appears.
After the button is clicked, the configuration of the selected
JPEG device is displayed in a browser window.
Enter the name of the camera.
Activate this check box and enter the number of images per
second to be displayed. This affects the network load when
viewing live images from the cameras.
Note:
The maximum number of displayed images depends on the
camera type and the parameters set for the camera (e.g.:
resolution, compression setting).
Enter the camera user name and password needed for log-on
(e.g. Mobotix banking camera).
If the IP camera is a motion detection camera, the video
system can be controlled when the sensor technology is
triggered. Activate the check box for this.
Enter the port to which the camera sends the motion
information.
DiBos/DiBos Micro
Bosch Sicherheitssysteme GmbH