Bosch DB18C3100R2 Installation Manual page 84

84 en | Default Configuration
Assigning AP addresses to inputs (not for Bosch G Series)
Inputs and outputs menu > AP inputs tab > Addresses section > Assign button
(see also Section 6.5.7 Configuring AP Inputs)
Assign AP addresses (not Bosch G series) to the inputs.
Adding addresses
1
2
3
6
Removing addresses
4
5
6
F.01U.033.308 | V7 | 2009.09
From
Group:
Alarm input:
To
Group:
Alarm input:
Add
Close
Selected addresses:
Remove
Close
Installation Guide
Enter the starting address in the input fields.
Enter the final address in the input fields.
Click the button. The addresses are added to the Selected
addresses: list field.
Finishes the procedure. Saves the entries.
Select the addresses you wish to remove.
Click the button. The addresses are removed from the
Selected addresses: list field.
Finishes the procedure. Saves the entries.
DiBos/DiBos Micro
Bosch Sicherheitssysteme GmbH