DiBos/DiBos Micro
6.5.5
Configuring Automatic Teller Machines
Inputs and outputs menu > Automatic teller machine tab
A maximum of 4 automatic teller machines, each with 2 inputs, can be connected to one video
system.
1
2
3
4
Bosch Sicherheitssysteme GmbH
Automatic teller machine
Interface:
Status query [h]:
Type
Installation Guide
Click the tab.
Select the interface.
After this time interval, the system checks repeatedly
whether the connected automatic teller machines
have completed a transaction. Enter the time in
hours. Example: Entering 2 would mean that a check
is run every 2 hours. Entering 0 would mean that no
check is run.
Note:
If the system does not display a transaction, an error
message is sent. If the connection between DiBos and
the automatic teller machine is faulty, another error
message is sent.
Click the down arrow in the column and select
whether an input is to be configured or not.
The input is assessed.
The input is not assessed.
Default Configuration | en
F.01U.033.308 | V7 | 2009.09
77