Bosch DB18C3100R2 Installation Manual page 105

DiBos/DiBos Micro
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Bosch Sicherheitssysteme GmbH
LDAP server settings
LDAP server:
Port
Activate encryption
LDAP basis for users:
Filter for users:
LDAP basis for groups: Unique name of LDAP path in which the search for groups
Filter for group
members:
Proxy user
User name (DN):
Password:
Testing
Test user
authentication and
group association
User name:
Password:
Testing
Group (DN):
Testing
Installation Guide
Name or IP address of the LDAP server.
Port number of LDAP server (Default: unencrypted = 389;
encrypted = 636)
For encrypted data transmission.
Unique name (DN = distinguished name) of LDAP path in
which the search for the user should be performed.
Example:
Ask your IT administrator for the unique name (DN) of the
LDAP basis.
For example, you receive the following DN:
CN=Users,DC=Security,DC=MyCompany,DC=com
Filter for searching for unique user name.
Example:
Ask your IT administrator for the filter to find a user with the
user ID xy in the LDAP server.
For example, for user xy, you receive the following filter:
(|(sAMAccountName=xy)(userPrincipleName=xy)
Replace xy with %username% and enter the filter.
should take place.
Filter used to search for group members of a group.
Example:
Ask your IT administrator for the filter to find user xy with his
DN (e.g.
CN=xy,CN=Users,DC=Security,DC=MyCompany,DC=com) in
the LDAP server.
For example, you receive the following path:
(&(objectclass=group)(member=DN)
Replace DN with %usernameDN% and enter the path.
Unique name of proxy user.
Proxy user password.
Tests whether the proxy user has access to the LDAP server.
User login ID, e.g. userB. The DN should not be entered here.
User password.
Tests whether the user ID and password are correct.
Unique group name. Used to check with which group the user
is associated.
Tests the group association of the user.
Default Configuration | en 105
F.01U.033.308 | V7 | 2009.09