Connecting The Isdn Controller - Bosch DB18C3100R2 Installation Manual

128 en | Connections
9.2

Connecting the ISDN Controller

To be carried out by authorized personnel only!
The ISDN connection is established via the supplied adapter cable (with Western plug) on the
computer's S
NOTICE!
Only the card type Fritz! Card PCI V2.0 may be used.
1
2
3
4
To install the ISDN card, the computer must be next to the ISDN connection and the card
must be integrated in the computer.
For data to be transmitted, the connection must support the EURO ISDN (DSS1) protocol. S
connections in PBXs may first have to be enabled in the PBX. The data service must also be
enabled in the incoming and outgoing direction. The video system is delivered for EURO ISDN
ex-works.
ISDN socket TAE 8 on the S
Sub-D socket
1-
2 - SR1-
3 - SR2+
4 - SX1-
5 - SX2-
ISDN socket IAE (RJ 45) on the S
Sub-D socket
1-
2 - SR1-
3 - SR2+
4 - SX1-
5 - SX2-
F.01U.033.308 | V7 | 2009.09
interface.
0
1 3
4
2
Video system
ISDN controller (transmitter or
receiver)
ISDN adapter card socket
Ferrite core
interface of the video system (9-pin Sub-D socket)
0
Installation Guide
6
5
5 Supplied adapter cable
6 Western plug
7 Only necessary for TAE sockets (not
included in delivery)
8 ISDN connection
TAE 8 plug
- 4 (b1)
- 3 (a1)
- 6 (a2)
- 5 (b2)
interface of video system (9-pin Sub-D socket)
0
IAE 8 plug
- 5 (b1)
- 4 (a1)
- 3 (a2)
- 6 (b2)
DiBos/DiBos Micro
7
8
Function
Transmit wire
Transmit wire
Receive wire
Receive wire
Function
Transmit wire
Transmit wire
Receive wire
Receive wire
Bosch Sicherheitssysteme GmbH
0