Bosch DB18C3100R2 Installation Manual page 92

92 en | Default Configuration
6
7
8
9
10
F.01U.033.308 | V7 | 2009.09
Dome camera control
Monitor control
Monitor A / Monitor B
Edit
Informing via E-mail
Activate
Recipient:
Configure E-mail
Copy settings to other
time periods...
Save
Installation Guide
A job can control a maximum of 4 dome cameras and pan/tilt
cameras.
Activate the check box of the line concerned. Then select the
camera to be controlled in the list field and a preposition or a
command.
Note:
Only different dome cameras and pan/tilt cameras can be
controlled.
The saved positions and commands must be configured
under Video and audio connections
camera Dome settings.
Once a job has been triggered, an alarm sequence can be
displayed on monitor A/monitor B.
Activate the check box. The cameras are displayed on the
monitor.
Click the button. A dialog box opens. Select the cameras and
the display duration.
Once a job has been triggered, a notification e-mail can be
sent.
Activates the e-mail notification.
Enter the e-mail address of the recipient.
Note:
Where there are several e-mail addresses, these must be
separated by semi-colons.
The e-mail server setup opens after the button is clicked.
During setup, enter data on the transmitter name, e-mail
address, user name etc.
Copies the selected job with all the settings it contains to
other time periods.
Select a job and click the button. A dialog box opens where
you can select the time periods.
The entries are saved.
DiBos/DiBos Micro
Add/Modify
Bosch Sicherheitssysteme GmbH