Bosch DB18C3100R2 Installation Manual page 118

118 en | Default Configuration
4
5
6
The DiBos recorder already contains the preinstalled Web application for access via the
browser. The Web application is activated by default. If access via http is to be prevented, the
World Wide Web Publishing Service must be deactivated.
Activating/deactivating the web application:
Administrator rights are necessary for the following steps.
1.
2.
3.
4.
5.
6.
7.
F.01U.033.308 | V7 | 2009.09
Transmission rate
Limit transmission rate Activate this check box if you want to limit the transmission
Transmission rate:
Reception rate:
UDP tunneling (for
firewall environments)
Activate UDP tunneling Activate this check box when you want to permit a network
Port number:
Activate transmission
encryption
Secret record:
Save
Log on to the operating system as Administrator.
Select Start > Control Panel.
Double-click the Administrative Tools icon.
Double-click the Internet Information Services icon.
Open the tree structure under Internet Information Services until you see the entry
Default Web Site.
Select the entry Default Web Site.
Start or stop the service. To do so, click the corresponding buttons.
Installation Guide
rate.
Select the transmission rate for DiBos-DiBos connections and
browser.
Select the reception rate.
Allows a network connection between DiBos computers via a
single port.
connection between DiBos computers via a fixed port.
Enter a port number that is not already used in the network.
The port number must be the same for the DiBos recorder
and the DiBos receiver.
Note:
This port must be enabled in the network. The video system's
Windows firewall must be deactivated.
Activate this check box if data transmission is to be
encrypted.
Enter a secret record of at least 10 digits. The secret record
must be the same on both computers.
The entries are saved.
DiBos/DiBos Micro
Bosch Sicherheitssysteme GmbH