Bosch DB18C3100R2 Installation Manual page 113

DiBos/DiBos Micro
9
10
Bosch Sicherheitssysteme GmbH
Settings
SNMP
Recipient 1:
Recipient 2:
SNMP GET Port:
Status message:
Save
Installation Guide
Click Settings and configure more precise details on
automatic alarm recording.
See also Section 6.13.3 Configuring Automatic Alarm Recording
DiBos sends camera, relay, input and database status
messages to an SNMP recipient via SNMP (Simple Network
Management Protocol).
See also Section 6.13.1 MIB List for SNMP and
Section 6.13.2 Notification via SNMP
Note:
The option to send messages via relay, inputs and databases
can be activated and deactivated. Camera messages cannot
be deactivated.
IP address or computer name of the 1st recipient.
IP address or computer name of the 2nd recipient.
Number of the port via which input, relay and camera
statuses can be called up.
Displays the statuses that trigger an SNMP message. Select
the corresponding check box to activate.
The entries are saved.
Default Configuration | en 113
F.01U.033.308 | V7 | 2009.09