Bosch DB18C3100R2 Installation Manual page 89

DiBos/DiBos Micro
8
9
10
Bosch Sicherheitssysteme GmbH
Type
Name
Save
Installation Guide
Click the down arrow in the column and select
whether an input is to be activated or not.
Note:
Input 1 = ATM/Pos device 1
Input 2 = ATM/Pos device 2
Input 3 = ATM/Pos device 3
Input 4 = ATM/Pos device 4
Input should be used to trigger image recording.
Input should not be used to trigger image recording.
Place the cursor in the column and enter the name of
the input.
Note:
The entries are saved.
Default Configuration | en
F.01U.033.308 | V7 | 2009.09
89