Connections; Network Connection Via Dsl - Bosch DB18C3100R2 Installation Manual

DiBos/DiBos Micro
9

Connections

9.1

Network Connection via DSL

To be carried out by authorized personnel only!
The following example explains how the connection is set up:
DiBos recorder network connection to DiBos receiver via DSL
1
2
3
For the DiBos Recorder
In the configuration of the DiBos recorder:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Bosch Sicherheitssysteme GmbH
DiBos recorder
Computer name:
DiBos recorder IP
address:
Subnet mask:
UDP port:
DSL router
Gateway:
(Intranet address of
router in the LAN)
Public address
(Internet address) of
router:
Select the Remote stations menu.
Click New and enter the name of the remote station (DiBos receiver).
Enter the public address (Internet address) of the remote station router (DiBos receiver),
e.g. 193.252.10.5.
Select Low bandwidth (live mode) as necessary.
Click OK.
Select the Security and network menu in the configuration.
Select Activate UDP tunneling.
Enter a free number under Port number (e.g. 1750).
Note:
Check that the port is unused using the netstat -a command.
Click OK.
Installation Guide
4 DiBos receiver
DiBos1 Computer name:
192.168.1.10 DiBos receiver IP
address:
255.255.255.0 Subnet mask:
1750 5 UDP port:
6 DSL router
192.168.1.1 Gateway:
(Intranet address of
router in the LAN)
193.251.9.31 Public address
(Internet address) of
router:
Connections | en 125
Receiver1
192.168.0.2
255.255.255.0
1750
192.168.0.254
193.252.10.5
F.01U.033.308 | V7 | 2009.09