Setting Up The Network - Bosch DB18C3100R2 Installation Manual

34 en | Quick Configuration
5.3

Setting up the Network

System menu > Configuration wizard > Next
If integrated into a customer network, the following settings must be made:
1
2
3
F.01U.033.308 | V7 | 2009.09
Network card:
Limit bandwidth
TCP/IP settings
Obtain IP address
automatically
Use following IP
address:
IP address:
Subnet mask:
Installation Guide
Select the network card.
Limits data transmission bandwidth to a value that the
system does not exceed.
Specify here whether the network connection should use a
fixed IP address or whether the IP address should be
assigned automatically.
The IP address of this network connection is dynamically
assigned by a DHCP server.
Note:
The device must be connected to the network and the
available network must support this function.
A fixed IP address will be assigned to the network
connection. In this case, the IP address and subnet mask
must subsequently be entered.
Note:
You can obtain these from your system administrator or
Internet service provider.
Enter the IP address.
Enter the number of the subnet mask. The IP address and
subnet mask determine which network your computer will
use.
DiBos/DiBos Micro
Bosch Sicherheitssysteme GmbH