Bosch DB18C3100R2 Installation Manual page 66

66 en | Default Configuration
Specify recording quality for analog cameras
Recording settings menu > Camera x - y tab > Quality levels... button
or
Options menu > Quality levels button
(see also Section 6.3 Configuring Recording Settings)
In this dialog box you can edit an existing recording quality or add a new recording quality.
1
2
3
4
5
6
7
8
Pre-defined standard values of the quality levels:
Recording quality
Excellent 4CIF
Very good 4CIF
Excellent 2CIF
Very good 2CIF
Good CIF
Normal CIF
F.01U.033.308 | V7 | 2009.09
Add
Remove
Rename
Image format
Bit rate [KBit/s]
Quality level:
OK
Installation Guide
List of existing recording qualities.
Adds a new recording quality.
Removes an existing recording quality. To do so, select the
name.
Changes the name of a recording quality. To do so, select the
name.
Select the image format.
If necessary, activate this check box and enter a maximum
value for the bit rate.
Note:
If a function is not activated, the bit rate is variable.
Activate the check box and select the quality level (2 =
highest quality level, 30 = lowest quality level).
Note:
If a function is not activated, the standard values are
adopted.
The entries are saved.
Image format
4CIF
4CIF
2CIF
2CIF
CIF
CIF
DiBos/DiBos Micro
Quality level
4
6
4
6
10
15
Bosch Sicherheitssysteme GmbH