Bosch DB18C3100R2 Installation Manual page 110

110 en | Default Configuration
3
The following events lead to error forwarding:
–
–
–
–
–
–
–
–
–
–
–
Adding a recipient/editing recipient data
Error forwarding menu > Add button or Edit button
Here you enter the recipient who is to be informed if problems arise.
Notification via the Network:
Transmission type
Computer name/IP
address
OK
Notification via E-Mail:
Transmission type
E-mail address
OK
Notification via SMS:
Transmission type
Telephone number
OK
Notification via Batch File:
Transmission type
Batch file
OK
F.01U.033.308 | V7 | 2009.09
SMS service
Save
The camera does not deliver a video signal
The logbook cannot be created or written
The images could not be recorded by the database server
Database server could not be started
Hard disk failure: Drive X deactivated, all drive X deactivated
The hard disk is full (protected data)
Internal database error
Device could not be started
Grabber card not working
Export video scheduler error
Reference image check failed
Click the down arrow and select the transmission type Network (=
net send).
Enter the computer name or IP address of the recipient.
Note:
The computer name must not contain any special characters. The
recipient's messenger service must be started up.
The entries are saved.
Click the down arrow and select the transmission type E-mail.
Enter the e-mail address of the recipient.
The entries are saved.
Click the down arrow and select the transmission type SMS.
Enter the telephone number of the recipient.
The entries are saved.
Click the down arrow and select the transmission type Batch file.
Enter the file name or click the adjacent button and select the file.
The entries are saved.
Installation Guide
The SMS service configuration opens after the button is
clicked. In the SMS configuration, enter data on the dialing
parameters and modems, transmit options etc.
The entries are saved.
DiBos/DiBos Micro
Bosch Sicherheitssysteme GmbH