Bosch DB18C3100R2 Installation Manual page 87

DiBos/DiBos Micro
5
6
7
8
9
10
11
Bosch Sicherheitssysteme GmbH
Switch on input
Switch off input
Data field with terminal
number information:
Type
Name
Terminal number
Save
Installation Guide
Click the arrow. The list of available data fields will be
displayed. The list contains all data fields that are
displayed under Data structure.
Select the name of the data field and, in the text field
underneath, enter the value that triggers an image
recording in the data stream of the POS server.
Where there are several values, these must be
separated by semi-colons.
Click the arrow. The list of available data fields will be
displayed.
Select the name of the data field and, in the text field
underneath, enter the value that ends an image
recording in the data stream of the POS server.
Where there are several values, these must be
separated by semi-colons.
Click the arrow. The list of available data fields will be
displayed.
Select the name of the data field which describes the
terminal number (e.g. cashpoint number).
Click the down arrow in the column and select
whether an input is to be activated or not.
Input should be used to trigger image recording.
Input should not be used to trigger image recording.
Place the cursor in the column and enter the name of
the input.
Enter the terminal number to which the POS input is
allocated on DiBos.
The entries are saved.
Default Configuration | en
F.01U.033.308 | V7 | 2009.09
87