74
en | Default Configuration
6.5.2
Configuring Relay Outputs
Inputs and outputs menu > Relay tab
The number of relay outputs depends on the model. In DiBos there are a maximum of 16 relay
outputs available and in DiBos micro, 12 relay outputs. The relays can be activated locally,
from a remote station, via a job or via a browser.
1
2
3
4
F.01U.033.308 | V7 | 2009.09
Relay
Type
Name
Save
Installation Guide
Click the tab.
Click the down arrow in the column and select
whether an output is to be activated or not.
The relay output is activated.
A malfunction relay can be connected to the relay
output.
Note:
Only one malfunction relay can be connected. The
events that trigger the malfunction relay can be found
in the Connecting a Malfunction Relay chapter in the
installation handbook
The relay output is not activated.
Place the cursor in the column and enter the name.
The entries are saved.
DiBos/DiBos Micro
Bosch Sicherheitssysteme GmbH