Bosch DB18C3100R2 Installation Manual page 104

104 en | Default Configuration
Selecting LDAP server user group
Authorization levels menu > Select user group... button
In networked DiBos systems, the use of LDAP (LDAP = Lightweight Directory Access Protocol)
allows central information, such as user groups, passwords etc., to be called up from a server
to be used in the DiBos system.
The advantage of this is as follows:
–
–
–
–
Before you can make the settings below, the individual groups and their members have to be
put on the LDAP server. These groups will then be assigned to the authorization levels in
DiBos. The configuration of the LDAP server is normally undertaken by the IT administrator,
not the DiBos administrator.
You will require the assistance of your IT administrator to make the following entries.
NOTICE!
All paths should be specified as accurately as possible. This makes it quicker to search the
LDAP server. The length of the search depends on the size of the database and can take
several minutes.
F.01U.033.308 | V7 | 2009.09
Users available in the DiBos network only need to be configured once on the LDAP
server, rather than on every DiBos.
A user's authorization level can easily be changed by modifying the group association of
the user. Group association is only changed on the LDAP server.
It is only on the LDAP server that new users are added and previous users deleted.
Local users are also available. They can continue to be created on each system.
Installation Guide
DiBos/DiBos Micro
Bosch Sicherheitssysteme GmbH