Configuring Remote Stations - Bosch DB18C3100R2 Installation Manual

94 en | Default Configuration
6.7

Configuring Remote Stations

Remote stations menu
In this dialog box, you determine the remote stations for your own workstation (local
computer) so that you can connect to these remote stations later in the configuration
procedure.
1
F.01U.033.308 | V7 | 2009.09
Local settings
Modem/ISDN:
Number of B channels
Accept incoming calls
(for standard users)
Password...
System control...
Info
Installation Guide
Edit the following settings for your own workstation.
Select the modem or ISDN card.
Note:
To configure a modem connection, an RAS-capable modem
must be connected and an RAS service installed.
Enter the number of B channels.
Incoming calls may be accepted by standard users.
Enter the password that allows remote stations to be dialed
into.
Under Windows XP, opens Network Connections in the
Control Panel.
Note:
Here you can configure your own IP address or make firewall
settings, for example.
If no RAS-capable modem is connected or no RAS service is
installed, a notes icon and a button with additional
information appears.
DiBos/DiBos Micro
Bosch Sicherheitssysteme GmbH