90
en | Default Configuration
6.6
Configuring Alarm Processing
Alarm processing menu
In this dialog box you can specify jobs for every time profile. Jobs are activities that are
started by inputs and cameras with motion detection.
The following actions are possible:
–
–
–
–
–
1
2
F.01U.033.308 | V7 | 2009.09
Starting an alarm recording
Controlling a relay output
Controlling a maximum of four dome cameras and pan/tilt cameras
Controlling camera sequences for a maximum of two video monitors
Informing via E-mail
Job
Add
Remove
Rename
Trigger
Installation Guide
Adds a new job. The name of the new job is sequentially
numbered and can be renamed.
Removes a job. To do so, select the job.
The name of the job can be changed. To do so, select the job.
In the list field, select the inputs or cameras with motion
detection whose triggering starts the job.
The following are displayed as triggers:
–
All types of inputs
–
Cameras with activated motion detection or activated
tamper detection
–
JPEG IP cameras and MPEG4 IP cameras with motion
detection
–
Skimming protection of foyer card reader
DiBos/DiBos Micro
Bosch Sicherheitssysteme GmbH