Bosch DB18C3100R2 Installation Manual page 120

120 en | Default Configuration
3
4
5
F.01U.033.308 | V7 | 2009.09
Load
Configuration wizard
Start
Language
Region
Keyboard layout
Licensing
License packages for
activation
License
Activate
Activated packages
Installation Guide
Click the button and answer the warning note with OK if the
previous file is to be overwritten or with Cancel if you want to
modify the file.
Click the button to start the Configuration wizard.
Caution:
The default configuration is overwritten with the last settings
saved in the Configuration wizard. Overwriting settings may
lead to the loss of previously configured settings (e.g.
recording settings, IP cameras). We recommend only using
the Configuration wizard for a newly installed system.
Click the arrow and select the language for the operating
system and the DiBos software.
Note:
If the language is changed, the system must be rebooted.
Click the arrow and make your selection.
Click the arrow and select the layout of the keyboard
connected.
The software is activated using a license activation key.
Devices that have been supplied with a HW dongle also
require the activation of the HW dongle.
Note:
– Factory-supplied DiBos recorders are already activated.
The license activation key is affixed to the front flap for
19-inch devices. The license activation key for DiBos
micro can be found on the left-hand side of the unit.
– DiBos receivers, DiBos IP recorders and DiBos
expansions are supplied with an authorization letter,
which includes an authorization number. After the
software is installed, they must be activated with a
license activation key. See Section 6.15.1 Activating a
License to find out how you obtain these license
activation keys.
– For devices with an existing dongle, the dongle is further
required. This also applies for the dongle extension file.
However, additionally ordered features must still be
activated with a license activation key.
The license packages that can be activated using a license
activation key are displayed.
Click the arrow and select a license package you would like to
activate.
Click the button to activate the selected license package. A
dialog box will open for you to enter the license activation
key.
The activated license package is displayed.
DiBos/DiBos Micro
Bosch Sicherheitssysteme GmbH