116 en | Default Configuration
6.13.3
Configuring Automatic Alarm Recording
Options menu > Settings button
In this dialog box you can configure automatic alarm recording of a remote station alarm.
1
2
3
4
5
6
7
8
9
F.01U.033.308 | V7 | 2009.09
Target directory:
Start recording automatically
Monitor data size in target
directory
Warning for more than [MB]
Monitor available memory on
target drive
Error message for less than
[MB]
Delete old video
Older than [days]:
OK
Installation Guide
Click
and select the directory where the data
will be saved.
Activate the check box to automatically save the data
for alarm input.
Activate the check box to monitor the size of the
saved data.
Enter the value for the data size in the target
directory. A warning is displayed if the value is
exceeded.
Activate the check box to monitor available memory
on the target drive.
Enter the value for the available memory that the
actual value must fall below for an error message to
be displayed.
Activate this check box when you want to delete data.
Enter the number of days after which data should be
deleted.
Example: 3 means that all data older than 3 days is
automatically deleted.
The entries are saved.
DiBos/DiBos Micro
Bosch Sicherheitssysteme GmbH