Monitor LED Display
The status of the transmitter is displayed by LED at the upper part of the front of a T16IZ.
Red LED
◆ ON At startup
◆ Blinking Power switch is turned on with
the throttle stick on the high
side.
Power switch is turned on when
any condition switch is activated
(in the ON state).
Stick Control
Aileron stick
Engine /motor
Power
Throttle stick
Roll axis
Rudder stick
Blue LED
◆ ON
Radio waves are being transmitted.
◆ OFF Radio waves are in the OFF state.
◆ Blinking (0.5 s)
Link mode
◆ Blinking (1 s) Range check mode
*Example Stick Mode2
Yaw axis
Elevator Stick
Pitch axis
19