Cisco SPA 500 Series and Wireless IP Phone Field Reference
Phone Tab
NOTE
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Parameter
Ring9
Ring10
Ring Tone (WIP310)
Parameter
Keypad Tone
Keypad Tone Volume
Auto Input Gain (dB)
Does not apply to the WIP310.
Parameter
Handset Input Gain
Headset Input Gain
Description
Ring tone script for ring 9. Defaults to n=Simple-
5;w=2;c=5.
Ring tone script for ring 10. Defaults to
n=Office;w=4;c=1.
Description
Select yes to enable the keypad tone to be played
when a key on the keypad is pressed. Select no to
silence the keypad.
Corresponds to the volume of the keypad tone.
Default is 5.
Description
The amount of amplification to apply to the audio input
signal for the handset.
Defaults to zero.
The amount of amplification to apply to the audio input
signal for the headset.
Defaults to zero.
B
255